Bobcat S220 W4320 Error Code
W4320 Error Code
"Manbasket mode : Remote control not connected to Manbasket harness (from Receiver CAN Bus signal)" is the main cause of W4320 error.The condenser converts gases into liquids, which expels heat from your rig. Materials can build up over time, causing a layer of dirt and grime to form on the condenser's coils. Your AC system will only blow hot air since the refrigerant fails to cool down.
Tip For S220 Model
Stop the machine on a firm flat surface. When
removing or installing attachments (such as a
bucket), always have a second person in the
operator's seat, give clear signals and work carefully.
NOTE: Installation and removal of a bucket is shown.
The procedure for other attachments is
similar. Disconnect all hydraulic connections
prior to removing the attachment (breaker,
auger, etc.)