BOBCAT Error Code Logo

Bobcat S220 M2007 Error Code

M2007 Fault Code Meaning :

Two Speed Solenoid Open Circuit

Two-speed Primary Solenoid Open Circuit

Two Speed Primary Solenoid Open Circuit

Two Speed Primary Open Circuit

M2007 Error Code

Two Speed Primary Open Circuit is the main cause of M2007 error.The condenser converts gases into liquids, which expels heat from your rig. Materials can build up over time, causing a layer of dirt and grime to form on the condenser's coils. Your AC system will only blow hot air since the refrigerant fails to cool down.

Bobcat S220 Photo

Tip For S220 Model

Do not use the bucket as a breaker or pile driver. It is better to excavate hard or rocky ground after breaking it with other equipment. This will reduce damage to the excavator.

Do not move the excavator while the bucket is in the ground.

Dig only by moving the boom and arm toward the excavator.

Do not back dig (digging by moving the boom and arm away from the excavator). Damage to the quick coupler and attachments can occur.

About | Contact | Privacy

Copyright © 2019 All rights reserved.

Bobcat Error Code

This website is not official or registered website. Please go official Bobcat website.

Sitemaps : 1-2-3-4-5